Support AppRadioWorld by shopping via these links...
***Shop Amazon.com*** or ***Shop eBay.com***

Friday, September 20, 2013

AppRadio 3 (SPH-DA110) Gets Firmware Update In Europe Only


Pioneer Europe has put out an update for the AppRadio 3 (SPH-DA110) non-disk drive version. The update version 8.05 is available for download from the Pioneer website. The update has nothing to do with the launch of iOS 7 or adding compatibility of any sort.

Read the full details below.

From Pioneer Europe's website…

SPH-DA110 Firmware Update Version 8.05

- Improvement for positioning precision on NAVI & MAP when connecting the iPhone 5
- MirrorLink support for: Samsung Galaxy S3 (Android 4.1.2) & Sony Xperia Z (Android 4.1.2)

Additional remarks:

- This firmware update applies only to SPH-DA110 AppRadio units sold in Europe and Russia.

There is also information regarding doing a recovery if the update fails or if it is interrupted. This update does not apply to units sold in the United States or Canada.

For Samsung Galaxy 3 or Sony Xperia Z users who wish to use the MirrorLink connection to connect their iPhone 5 to the AppRadio 3, this update is essential. There has been some apprehension about performing updates to AppRadio units in the past.

If any of our European readers has updated their AppRadio 3 and wish to share their experience, please leave a comment below.

Full details are available from the Pioneer Europe website.

8 comments :

  1. This update finally enables the AppRadio's GPS signal for me over bluetooth (iPhone 5). Before the update it only used the iPhone's GPS.

    ReplyDelete
  2. We NEED some kind of update for the 5s connectivity.

    ReplyDelete
  3. I have the 5S and can confirm the appradio 3 is not working. Hopefully there's a fix coming soon

    ReplyDelete
  4. They need to update all AppRadios to display the time no matter which app one is using.

    ReplyDelete
  5. They need to update all AppRadios to display the time no matter which app one is using.

    ReplyDelete
  6. I have an issue with app3 where my s4 won't fully connect through the mhl adaptor and Bluetooth .. It only connects to mirror the image from phone to sph da110 but I won't be able to access anything in the phone through the unit ..

    ReplyDelete
  7. Same as above. My S4 active have worked in appradio mode once!
    It fails to use both cable and Bluetooth simultaneously

    ReplyDelete

All comments will be screened for spam. Allow up to 24 hours for comments to show up.

NO SPAM PLEASE!